Beer Brewing / Beer Kegs & Kegging
Kegging your beer is hard to beat. It's easy, reduces the cleaning and fuss necessary for bottles, and besides...it's waaaaaaaay cool to have your own home brew on tap!
1/4" Id Gas Line (Thick Wall) - Per Foot"
-- $0.95
-- Recommended for all gas (CO2) lines. Thick wall for secure, easy clamping.
Buy Now
1/4" Barbed Tailpiece
-- $2.25
-- tailpiece for the end of your faucet shank or sankey tap
Buy Now
16 Gram Co2 Cartridge
-- $2.15
-- For the new Cornelius keg chargers, and also Mini Keg Taps.
Buy Now
3/16" Barbed Tailpiece
-- $2.25
-- tailpiece for the end of your faucet shank or sankey tap
Buy Now
3/16" Beer Line, Thick Wall Per Foot"
-- $0.90
-- Recommended, even tho it's a tight fit, to provide some restriction on your beer line. This allows you to use a higher keg pressure and keeps your beer carbonated. Thick wall tubing for secure, easy clamping.
Buy Now
3-Way Gas Manifold W/Shutoffs
-- $49.95
-- All-metal manifold with 3 controls
Buy Now
5 Gallon Cornelius Keg (used, Ball Lock )
-- $45.95
-- Used 5 gallon soda kegs. Each keg has been pressure tested to ensure a good seal. O-rings that are currently installed are not new, so a new o-ring kit is included. Measures approx 26" high (with the in and out fittings connected), and 8.5" in diameter
Buy Now
74 Gram Co2 Cartridge
-- $12.98
-- For the Mini Co2 Regulator Keg Charger. 74 grams! Enough to charge & dispense up to 4, 5-gallon kegs.
Buy Now
8 Gram Co2 Cartridge (Each)
-- $1.05
-- Used in some beer systems, like the Beer Machine etc.
Buy Now
Activation Pump For Party Pig
-- $8.95
-- Only one Activation Pump is required to activate Party Pigs, no matter how many you have.
Buy Now
Beer Faucet Wrench
-- $4.50
-- Used for tightening/loosening beer taps
Buy Now
Beer Line Cleaning Kit - Complete!
-- $68.95
-- Includes Foxx Superflush Cleaner, Pump, Bottle, Beer Faucet Brush and Faucet Wrench
Buy Now
Beer Line Cleaning Kit - Complete!
-- $68.95
-- Nothing ruins a fine beer like a dirty or contaminated beer line or faucet. This kit includes Foxx Superflush Cleaner, Pump, Bottle, Beer Faucet Brush and Faucet Wrench
Buy Now
Beer Washer
-- $0.50
-- Beer washer for those sankey taps and faucet shanks
Buy Now
BeerGun Stainless Bottle Filler
-- $74.95
-- One-handed intuitive operation. Everything that touches the beer is stainless steel. Low foaming. The BeerGunTM comes with everything pictured here - a 10ft length of 3/16" ID hose and a brush for cleaning the inside of the tubes.
Buy Now
Carbonator
-- $18.95
-- Used to carbonate your plastic 2 Liter Soda-Pop bottles using a CO2 bottle and ball-lock fitting. This may be done overnight. Lower temperatures, higher pressures, and more agitation will increase the carbonation level.
Buy Now
Chrome Gage Protector (Gage Cage)
-- $28.95
-- Bolts on to your Regulator and protects your gages from bumps. Will save you $$$ in broken gages. Worth having if you take your kegging system out for parties.
Buy Now
Co2 Regulator With Turn Valve
-- $58.95
-- New QUALITY regulator. Two gages--one for bottle pressure, one for line pressure. Comes with internal check valve. The best pressure regulator out there for kegging systems.
Buy Now
CO2 Tank Gasket - Set of 2 Gaskets
-- $1.75
-- Set of 2. This is the hard plastic gasket that goes between your CO2 tank and your regulator.
Buy Now
Cornelius Keg / Demijohn Brush
-- $17.50
-- Extra large brush for cleaning out those kegs and demijohns. Rugged brush that is 36" long and has 6" diameter bristles. (corne keg not included)
Buy Now
Cornelius Kegging System Setup & Maintenance - Leaflet
-- $1.00
-- The name says it all. Details of kegging for the home brewer. By Homebrew Heaven. 6 pgs.
Buy Now
Counterpressure Bottle Filler W/Quick Valves
-- $65.95
-- Used to bottle beer from kegs. Purges the bottle with CO2 prior to filling.
Buy Now
Double Draft Beer Tower
-- $199.05
-- Complete with all parts and ready to install •Includes faucets •Includes 5ft - 3/16" tubing with tailpieces, hex nuts and washers •Styrofoam insulated stainless steel barrel (not pvc like others) to prevent sweating. Brass Finish (extra) is shown.
Buy Now
Drip Tray - Stainless Steel
-- $42.95
-- Brushed stainless steel tray, back and grating. 1/2" copper drain tube. Measures 4" deep, 6" wide with two drilled holes for easy installation onto your 'fridge, kegerator, wall...you name it.
Buy Now
Hand Pump Dispenser For Corney Keg
-- $42.95
-- Use in place of a CO2 bottle/regulator for parties/picnics. Much more convenient. Manually pump your corney keg. No CO2 required. Recommend for short term use (parties) only, since beer tends to "stale" in the presence of oxygen. Great otherwise.
Buy Now
Hex Nut
-- $1.75
-- This nut connects to the end of our faucet shank and also is connected to the ends of a sankey tap
Buy Now
High Pressure Gage 0-2000 psi
-- $14.95
-- Replacement gage, shows CO2 bottle pressure. Available in both right and left hand thread. Please determine which you need prior to ordering. Measures from 0-2000 psi, with a red "Order Gas" zone, below 500 psi.
Buy Now
In-Line Check Valve (Gas)
-- $9.50
-- Used to prevent backflow into regulator/beer lines
Buy Now
Keg Faucet Tap (Handi-Tap)
-- $44.95
-- A handy little item. Directly connects a spigot to your corney keg. For a completely portable kegging system, consider getting a Keg Charger!
Buy Now
Keg Lube (Petro-Gel) For Keg O-Rings
-- $5.25
-- Apply a thin film to o-rings to prevent leaks and make removal of keg fittings easy. Food grade grease.
Buy Now
Low (Line) Pressure Gage, 0-30 psi
-- $10.95
-- Replacement gage for the gas line (low pressure) side of regulator. Right hand thread only, 0-30 psi. Dial face is 2" in diameter.
Buy Now
Mini Co2 Regulator - Ball Lock
-- $164.95
-- The mini-reg features total portability with all the features of a full size regulator.
Buy Now
Modular 2 Way Gas Distribution Manifold
-- $32.95
-- Allows you to add more kegs to your system, and still control gas flow.
Buy Now
New 5 Lb. Aluminum Co2 Tank
-- $90.95
-- A NEW, lightweight aluminum CO2 tank.
Buy Now
Optional Accessory Kit for BeerGun
-- $22.50
-- This optional accessory kit provides everything you need to get your BeerGun up and running! Click on product name for more information
Buy Now
O-Ring Set for Cornelius Kegs
-- $3.75
-- All the o-rings for your keg. Large ring for the lid, two for the poppets, 2 for dip tubes.
Buy Now
Party Pig Kit
-- $39.95
-- A great beer dispenser. Contains Party Pig, all fittings, carrying cradle and 2 disposable Pressure Pouches. You will need an Activation Pump to inflate the pouches (only one required no matter how many Pigs you own!). Holds 2.25 gallons of beer, and keep
Buy Now
Pin Lock Fitting-Beer Out (3-Pin)
-- $7.95
-- For "Coke" style cornelius kegs. The beer-out fitting has 3 pins on the connector.
Buy Now
Pin Lock Gas In Fitting (2 Pin)
-- $7.95
-- For "Coke" style cornelius kegs. The gas-in fitting has 2 pins.
Buy Now
Plastic "T" Fitting For Gas or Beer Line
-- $2.95
-- Used to split a gas or beer line for multiple kegs.
Buy Now
Plastic Tapper Spigot
-- $4.95
-- The fun end of the setup. Also called a cobrahead or picnic faucet. Hand-held plastic faucet for dispensing beer, soda pop etc.
Buy Now
Pony Pump For Sanke Keg
-- $38.95
-- Handy tap for picnics (and KEGGERS!). Don't forget to invite Ralph, the webmaster of Homebrew Heaven. He likes beer, too! Just pump in some air, and out comes fun...
Buy Now
Pressure Pouch For Party Pig
-- $4.25
-- Pressurizes your Party Pig. One pouch is need each fill-up. (disposable)
Buy Now
Quick Disconnect Ball/Out W/Ftgs
-- $8.25
-- Beer out fitting for ball-lock style kegs. Allows easy interchange of fittings.
Buy Now
Quick Disconnect Fitting- In W/Ftgs
-- $8.25
-- Gas-in fitting for ball lock cornelius kegs. This one has a threaded connection for easy change.
Buy Now
Quick Disconnect Pin/Beer Out W/Ftgs
-- $8.95
-- For "Coke" style cornelius kegs.
Buy Now
Quick Disconnect PinLock Gas-In W/Ftgs
-- $8.95
-- For "Coke" style cornelius kegs.
Buy Now
Quick Disconnect-Ball In Fitting
-- $7.25
-- Gas in fitting for ball lock corney kegs. Barbed end.
Buy Now
Quick Disconnect-Ball Out Fitting
-- $7.25
-- Beer out fitting for ball lock cornelius kegs.
Buy Now
Sanke Beer Tap (Coupler) for 15.5 Gal Kegs
-- $46.95
-- For 15.5 Gal Sanke style kegs. Requires CO2 bottle, regulator, beer line, gas line and tap.
Buy Now
Sanke Keg Picnic Tap (Airpump)
-- $59.95
-- Great for parties. Fits 15.5 gallon Sankey type fitting.
Buy Now
Single Draft Tower
-- $125.95
-- Same as above, but with one spigot. Finish is chrome. (not pvc tubing!)
Buy Now
Stainless Steel "Cross" Fitting For Gas Line
-- $10.99
-- Used to split the gas line for running multiple kegs.
Buy Now
Stainless Steel "T" Fitting For Gas or Beer Line
-- $7.99
-- Used to split a gas or beer line for multiple kegs.
Buy Now
Stainless Steel 0.5 Micron Carbonation Stone
-- $14.95
-- Carbonates your kegged beer in minutes. By connecting this stone to a 1/4" hose and your CO2 "in" line, the bubbles come up thru your beer as a super-fine mist, and easily go into solution. Active part of the stone is about 1 inch long.
Buy Now
Stainless Steel Hose Clamps
-- $0.85
-- Used to connect Cornelius fittings to gas and beer lines.
Buy Now
Swivel Nut Assy.
-- $1.99
-- To connect some types of Regulators to Gas Line or to connect to the C92C and C92D Corne Keg fittings. One of these is included with the C91 Regulator.
Buy Now
Thru Wall Shank W/ Chrome Faucet
-- $49.95
-- Spiff up your refrigerator with a tap on the outside. Add MORE taps! Build your own kegerator or jockey box.
Buy Now