3/8" x 1/2" brass compression fitting

$2.35 -- 3/8" x 1/2" Compression fitting used to connect our Stainless False Bottoms to the thru-wall fitting.

Purchase 3/8" x 1/2" brass compression fitting

SKU: C1

Other products in the category Beer Brewing / Brewpots, Kettles & Stuff:

7.5 Gallon Stainless Steel Brewpot W/Lid -- Our best seller. Perfect size for a boil kettle, or for all-grain mashing. A great value. Brewpot measures 14 1/4" in diameter, and 11 1/4" high

9 Gallon Bayou Classic Stainless Steel Brewpot W/Lid -- Great brewpot for the price! Perfect size for a full boil of 5 gallons of homebrew without boiling over! Also great for all grain Mashing. Measures 14 1/4" in diameter, and 14 1/8" high

BoilerMaker® Boil Kettle Strainer -- Snaps quickly into the standard dip-tube. It hugs the sidewall and features a stainless steel shield to keep hops and hot break from clogging the filter. **For use with Blichmann Boilermaker brewpots only**

15.5 Gallon Stainless Steel Brewpot w/Lid Made by Bayou Classic -- All stainless brewpot at a great price. Works best for 10gal batches. Measures approximately 16.5" in diameter, and 18.5" high. Use a Super Chiller for cooling if wort chiller is desired, standard chiller is too small!

20.5 gallon (82 quart) Stainless Steel pot w/lid (made by Bayou Classic) -- NEW! Great size pot for those LARGE 10+ gallon brews. 19.75" wide X 17" tall

Brewpot Spigot Kit (Installed) -- Offer good only with pots purchased from Homebrew Heaven. Please allow an extra day processing time for this custom installation. Includes a thru-wall fitting, ball valve and s/s nipple to connect the two.

BrewMometer Stainless Steel Thermometer -- Dial face guides the brewer through the brewing process, helping to improve quality and consistency. 3" dia. dial, fine pointer, large lettering, and custom made temp range means accuracy! Avail in 1/2" NPT. 3.25" stem. *Requires a 1/2 NPT thru-wall ftg*

Stainless 1/2" Npt Coupling -- Do your own welding with these couplings. 1/2 NPT internally (female) threaded. Allows you to screw in accessories like spigots, thermometers, false bottoms etc

Thru-Wall (Bulkhead) Fitting - Brass (1/2" Npt) -- With any brewpot here, we'll install this weldless fitting for FREE!---just tell where you want it in the "Fitting Placement" section. We'll do it for you. Otherwise, we will just use common sense. Uh oh!...

Thru-Wall (Bulkhead) Fitting - Stainless Steel (1/2" Npt) -- Same as above, but STAINLESS! With any brewpot here, we'll install this weldless fitting for FREE!---just tell where you want it in the "Fitting Placement" section. We'll do it for you. Otherwise, we will just use common sense. Uh oh!...

Brass 1/2'' thru wall plug -- 1/2" mpt plug

The Bazooka "T" Screen -- Very nice, huge screen for your brewpot. Can be used for all-grain brewing (mashing) or for straining out leaf hops. This screen works particularly well in converted Sanke style kegs

Brass Barbed Fitting - 1/2NPT -- Often used on the "out" side of our brewpot spigot kit. Allows connection of outflow hose (2 barb sizes available)

Stainless Steel Barbed Fittings - 1/2" NPT -- Great for use with full stainless boiling, mashing, sparging setups. All stainless steel barbed fittings for both 3/8" and 1/2" ID tubing sizes.

Ball Valve - Stainless Steel 1/2" NPT -- Top quality stainless ball valve. Has 1/2" NPT (female) threads on each end.

Ball Valve (Faucet)-Brass-1/2" Npt

SightGlass 16" Stainless Steel -- 16" stainless steel + glass sightglass. Perfect for use on 15 gallon kegs allowing you to monitor liquid level in keg. Requires a thru-wall fitting or a Weld-B-Gone fitting in your pot to make it work.

Stainless Threaded 1/2" Nipple -- For installing thermometer wells, and ball valves