15.5 Gallon Stainless Steel Brewpot w/Lid Made by Bayou Classic

$124.95 -- All stainless brewpot at a great price. Works best for 10gal batches. Measures approximately 16.5" in diameter, and 18.5" high. Use a Super Chiller for cooling if wort chiller is desired, standard chiller is too small!

Purchase 15.5 Gallon Stainless Steel Brewpot w/Lid Made by Bayou Classic

Now, for a limited time, you can choose to have a custom made straining basket with your 15.5 gallon kettle.
These straining baskets are made of Stainless Steel 1/2" round holes, nest nicely inside and come with a lifting handle for ease of removing.
With the 1/2" hole size in the baskets it would NOT work for straining out grain or hops, but would work great for your next crab feed or clam bake.
(New pictures of the kettle with basket coming soon)

Purchase 15.5 Gallon Stainless Steel Brewpot w/Lid Made by Bayou Classic

SKU: C15

Other products in the category Beer Brewing / Brewpots, Kettles & Stuff:

5 Gallon Stainless Steel Brewpot w/Lid -- Same as our great 7.5 gallon pot, but smaller. Measures 10" high, 12" in diameter. All stainless steel, at a great price!

7.5 Gallon Stainless Steel Brewpot W/Lid -- Our best seller. Perfect size for a boil kettle, or for all-grain mashing. A great value. Brewpot measures 14 1/4" in diameter, and 11 1/4" high

9 Gallon Bayou Classic Stainless Steel Brewpot W/Lid -- Great brewpot for the price! Perfect size for a full boil of 5 gallons of homebrew without boiling over! Also great for all grain Mashing. Measures 14 1/4" in diameter, and 14 1/8" high

Boilermaker® Brewing Pots - 10 Gallons to 55 Gallons -- Designed by a brewer, with all the features you want! Remember, you receive 10% OFF prices shown when you add it to your shopping cart! Click on name for more details **DROP SHIP ONLY** not carried in our retail store.

20.5 gallon (82 quart) Stainless Steel pot w/lid (Bayou Classic) -- NEW! Great size pot for those LARGE 10+ gallon brews. 19.75" wide X 17" tall

Brewpot Spigot Kit (Installed) -- Offer good only with pots purchased from Homebrew Heaven. Please allow an extra day processing time for this custom installation. Includes a thru-wall fitting, ball valve and s/s nipple to connect the two.

BrewMometer Stainless Steel Thermometer -- Dial face guides the brewer through the brewing process, helping to improve quality and consistency. 3" dia. dial, fine pointer, large lettering, and custom made temp range means accuracy! Avail in 1/2" NPT. 3.25" stem. *Requires a 1/2 NPT thru-wall ftg*

Stainless Steel False Bottom Kit -- Our best selling False Bottom. Designed for a converted Sanke style keg, but works great in most any brewpot. Includes 3/8" outside diameter (stainless) pick up tube. Click on name for more details

Stainless Steel Kettle Screen -- Stainless steel mesh screen that works nicely for all-grain brewing OR for straining out LEAF hops after your boil (Not recommended for use with pellet hops as they will clog the screen!!) Click for more details.

Stainless 1/2" Npt Coupling -- Do your own welding with these couplings. 1/2 NPT internally (female) threaded. Allows you to screw in accessories like spigots, thermometers, false bottoms etc

Thru-Wall (Bulkhead) Fitting - Brass (1/2" Npt) -- With any brewpot here, we'll install this weldless fitting for FREE!---just tell where you want it in the "Fitting Placement" section. We'll do it for you. Otherwise, we will just use common sense. Uh oh!...

Thru-Wall (Bulkhead) Fitting - Stainless Steel (1/2" Npt) -- Same as above, but STAINLESS! With any brewpot here, we'll install this weldless fitting for FREE!---just tell where you want it in the "Fitting Placement" section. We'll do it for you. Otherwise, we will just use common sense. Uh oh!...

3/8" x 1/2" brass compression fitting -- 3/8" x 1/2" Compression fitting used to connect our Stainless False Bottoms to the thru-wall fitting.

Brass 1/2'' thru wall plug -- 1/2" mpt plug

Sight Glass 11"or 16" Stainless Steel -- 11" or 16" stainless steel + glass sightglass. Perfect for use on 7.5 gallon pots on up to 15 gallon kegs allowing you to monitor liquid level. Requires a thru-wall fitting or a Weld-B-Gone fitting in your pot to make it work.

HopBlocker -- This exciting new patent pending device is virtually plug free and captures up to 95% of the brew kettle particulates! Directs the clear wort to the kettle drain and keep the particulates at the bottom. Works best with Boilermaker brewpots

Brass Barbed Fitting - 1/2NPT -- Often used on the "out" side of our brewpot spigot kit. Allows connection of outflow hose (2 barb sizes available)

Stainless Steel Barbed Fittings - 1/2" NPT -- Great for use with full stainless boiling, mashing, sparging setups. All stainless steel barbed fittings for both 3/8" and 1/2" ID tubing sizes.

Ball Valve - Stainless Steel 1/2" NPT -- Top quality stainless ball valve. Has 1/2" NPT (female) threads on each end.

Ball Valve (Faucet)-Brass-1/2" Npt

Stainless Threaded 1/2" Nipple -- For installing thermometer wells, and ball valves

RELATED PRODUCTS

BrewMometer Stainless Steel Thermometer -- Nice to read the temp from the outside

Brewpot Spigot Kit (Installed) -- With this large of a pot, you don't want to lift! Have us install a spigot...open a valve to drain!

Stainless Steel False Bottom Kit -- Essential for all-grain batches

Super Wort Chiller,Outdoor -- We recommend this wort chiller for large batches (over 5 gallons)

Thru-Wall (Bulkhead) Fitting - Brass (1/2" Npt) -- Used to install the BrewMometer into the pot. We do it for free!